Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Miramar
Door installation in Miramar typically runs between $900 and $4,800 depending on the door type, framing work, and whether the unit carries the HVHZ product approval Broward County inspectors require before they’ll sign off. Most entry door replacements here take one day once the permit clears, and we handle the permit paperwork, the HOA design review, and the install in a single coordinated sequence. We serve every Miramar neighborhood from Silver Lakes to Monarch Lakes to Riviera Isles, and our crews know exactly what the county will check before they close the permit. Call (386) 516-5343 to schedule a free estimate. If you’re weighing a builder-grade door that’s starting to bind or corrode, this page covers what Miramar’s code and your HOA actually demand, so you don’t buy a unit that fails inspection.
Why TruePane Windows & Doors Is Miramar’s Preferred Door Installation Company
TruePane has spent over four decades learning what South Florida’s salt air and humidity do to door frames, thresholds, and weatherstripping. Miramar sits inland in Broward County, but the Atlantic-corridor air still reaches every Silver Lakes stucco wall and every 1960s rambler off Miramar Parkway. Aluminum frames oxidize faster here than homeowners expect. Weatherstripping turns brittle. Builder-grade French doors from the early 2000s start binding at the top corner by July. We’ve corrected enough of those failures to know what’s salvageable and what belongs in the trailer.
Our Door Installation team works under the Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves your driveway. That matters in Miramar because the HVHZ product approval printed on your door label is what the county inspector verifies. We register the warranty and we keep the paperwork in order. Dale Kessler founded this company on a simple rule: if the pane is not true, the job is not done. That standard applies to every jamb, hinge, and threshold we set in Miramar.
We answer the phone with a live person, 24 hours a day. No voicemail tree, no regional call center. When a Miramar homeowner calls about a door that won’t latch before a June storm, they speak to someone who can pull up the job file and dispatch a background-checked, uniformed technician. Our crews carry HVHZ-compliant anchors, stainless hardware, and flashing materials rated for Broward County’s humidity. We don’t send a salesperson with a brochure. We send a glazier with a tape measure and a torque wrench.
Our Door Installation Services in Miramar
Entry & Swing Doors
Entry doors in Miramar’s 1990-2008 planned communities are usually builder-grade steel or fiberglass units with standard weatherstripping. They were fine when the house was new. Twenty years of Broward humidity later, the threshold is pitted, the sweep is flattened, and the door binds when the afternoon sun hits the west wall. We replace them with properly shimmed, HVHZ-labeled units that open square in January and July. A standard single entry door installation in Miramar runs $900 to $2,200 depending on the material and whether the rough opening needs correction.

Double & French Doors
These are the first upgrade in planned-community homes because the original aluminum French doors rarely meet current wind mitigation standards. In a 2003 Silver Lakes home, we replaced a builder-grade aluminum double French door after the wind mitigation inspection flagged it as non-impact and uninsurable. We installed a ViewLux impact-rated unit with a Miami-Dade NOA label, retrofitted the jamb with an HVHZ-compliant anchor system, and walked the homeowner through the HOA design review without delaying the permit. Double French door installations in Miramar typically run $2,400 to $4,800. The range reflects framing, stucco repair, and whether the existing opening is out of square, which it often is after two decades of settling.

Bifold & Folding Doors
Bifold and folding door systems are gaining ground in Miramar’s newer lakefront homes along Monarch Lakes and Riviera Isles, where owners want an indoor-outdoor transition to the patio. These openings are broader, and broader openings catch more wind. Every folding door in Miramar must carry the explicit HVHZ designation, not just a Florida statewide approval. We quote manufacturer lines side by side on paper so you see the load ratings, the anchoring schedule, and the warranty terms before any work starts.

Pivot Doors
Pivot doors are a statement entry, and several Miramar homes along Miramar Parkway and in the western developments have adopted them. They’re heavy. The pivot hinge carries the full weight of the slab, and the header must be reinforced to Miramar’s wind load requirements. We measure every opening twice, check the structural capacity of the header, and pull the permit. A pivot door installation in Miramar starts around $3,200 and climbs with slab size, finish hardware, and any header reinforcement. This is not a door to cut corners on, and Broward inspectors will notice if you did.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Miramar
We’re an authorized installer for more than a dozen manufacturer lines, and on Miramar jobs we lean on the lines that meet HVHZ requirements without argument: all produce units with proper Miami-Dade NOA or HVHZ-specific approvals. We quote these side by side on paper, with the warranty durations written out. We also keep common Miramar parts on the truck: stainless hinges, heavy-duty thresholds, and flashing tape rated for South Florida’s salt-laden air. That means fewer second trips and fewer delays when the permit office is backed up.
Common Door Installation Problems We See in Miramar Homes
- Doors labeled “impact-rated” that still fail Broward inspection. A door carrying only a standard Florida statewide approval, without the explicit HVHZ designation printed on the label, will be rejected by a Miramar inspector regardless of its advertised impact rating. The homeowner is then stuck paying for a change-out. We verify the product approval number before we ever order the unit.
- Builder warranty terms overlooked on younger homes. Homes under 10 years old in Miramar’s planned communities often still carry structural warranties on wall sections. Enlarging a door opening without checking those terms can void coverage. We review the builder warranty language with the homeowner before cutting anything.
- Hardware corrosion from Miramar’s humidity and salt air. Standard hinges and thresholds degrade fast here. We specify stainless hardware and corrosion-resistant flashing as a default on every exterior door in Miramar. It’s not an upsell. It’s what the climate demands.
- Sliding doors with white oxidation and failed interlock seals. Builder-grade aluminum sliders from the 1990s and 2000s routinely show white crust at the bottom track and along the interlock stile. The frame isn’t failing, but the weather seal is gone, and the door can’t hold a wind load. We either replace the unit or rebuild the interlock, depending on what the glass package can support.
Pricing for Door Installation in Miramar, FL
Here’s what our Miramar jobs typically run. A single entry door replacement runs $900 to $2,200. Double French doors run $2,400 to $4,800. Bifold and folding door systems run $3,000 to $6,500 depending on the panel count and anchoring. Pivot doors start around $3,200 and can reach $7,000 for a large slab with premium hardware. Storm doors run $500 to $1,400 installed. The factors that move the number are framing correction, stucco repair after removal, HOA-required finish matching, and whether your opening needs structural reinforcement to meet Broward’s wind load requirements. Every estimate is a written line-item quote. No surprise line items on the bill. Call (386) 516-5343 to schedule your free estimate, and we’ll measure your openings and price the job honestly.
We Also Serve Cities Near Miramar
TruePane serves the full Miramar area, and our crews regularly work in Miami Gardens, North Miami, North Miami Beach, and Ojus. If you’re a few blocks over the city line, the same HVHZ rules apply, and the same crew will show up. Call (386) 516-5343 and we’ll confirm your service area and set a time.
Serving Miramar, FL - Our Local Coverage Area
We’re based in the Miramar area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Miramar
Yes. Broward County requires a permit for virtually every residential door replacement, including same-size, same-style swaps. The county inspector will physically verify the HVHZ-specific product approval number printed on the unit’s label before signing off. A door with only a standard Florida statewide approval, no matter how impact-rated the marketing says it is, will fail. We pull the permit, schedule the inspection, and stand there while the inspector reads the label. Call (386) 516-5343 if you want the permit handled without you chasing the county.
It can, but only if the door carries the proper HVHZ approval and the installation is documented. Miramar sits inside the High-Velocity Hurricane Zone, and South Florida carriers are canceling or surcharging policies on homes with pre-1994 non-impact openings. A new entry door with a Miami-Dade NOA, plus the inspection photos and permit closeout, gives your agent something to submit. But a door without the explicit HVHZ designation won’t help and could complicate the file. We provide the paperwork your insurer actually asks for. Call (386) 516-5343 for a free estimate and a straight answer on what your carrier will accept.
Yes. Most Miramar HOAs, especially in Silver Lakes, Monarch Lakes, and Riviera Isles, require design review before an exterior door changes color, material, or style. We’ve handled that process many times. Our team fills out the HOA application, attaches the product spec sheet and the Miami-Dade NOA, and coordinates with the property manager so the design review doesn’t stall your permit. We did exactly that on a ViewLux impact-rated door in Silver Lakes, where the homeowner’s wind mitigation inspector had flagged the original unit. The design review cleared, the permit cleared, and the door passed inspection. Call (386) 516-5343 and we’ll start the paperwork.
Probably not the glass seal, but the weather seal. The white corrosion on the aluminum frame is oxidation from Miramar’s humidity and salt-laden air, and it usually means the interlock seal between the panels has broken down. The door binds because the frame has settled or the rollers are shot. In some cases we can replace the rollers and rebuild the interlock. In others, the glass package is old single-pane and the whole unit belongs in the trailer. A free measurement visit will tell you which one you have. Call (386) 516-5343.
HVHZ stands for High-Velocity Hurricane Zone, and Miramar falls entirely inside it, along with Miami-Dade and Broward counties. That designation carries the nation’s strictest fenestration standards. Every door, including a pivot door, must carry either a Miami-Dade NOA or a Florida statewide approval with an explicit HVHZ designation. A standard impact door legally sold in Weston or Pembroke Pines may not carry that designation and will fail inspection in Miramar. We quote only HVHZ-approved units for Miramar work, because ordering anything else means a change-out and a second permit. Call (386) 516-5343 for a free estimate on the right door for your opening.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Miramar with honest pricing and HVHZ-compliant installations.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After