Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Miramar
Window installation in Miramar means something different than it does in most of Florida. Miramar sits entirely inside the High-Velocity Hurricane Zone, so every replacement window, even a single unit in a 1960s ranch off Miramar Parkway, has to carry a Miami-Dade NOA or a statewide approval with an explicit HVHZ designation. Miss that detail and Broward County fails the inspection. TruePane Windows & Doors has been installing code-compliant windows across Miramar for years, and our crews know exactly what the inspector checks before signing off. Call (386) 516-5343 and we’ll walk you through what your house actually needs.
Why TruePane Windows & Doors Is Miramar’s Preferred Window Installation Company
Miramar homeowners tend to be people who have lived in the same house for twenty or thirty years. They remember the contractor who installed a fogged-seal slider in 2004 and never returned a call. That history is exactly why Dale Kessler founded TruePane in 2008 with one rule still on the whiteboard: if the pane is not true, the job is not done.
Our Window Installation team works out of our South Florida office and serves Miramar neighborhoods from Silver Lakes to Monarch Lakes to eastern Miramar’s older grid streets. Background-checked, uniformed technicians measure every opening twice. We quote manufacturer lines side by side on paper so you see exactly what you’re buying. And both warranty layers get registered in writing before the truck leaves your driveway, under The Keystone Standard. That’s not a pitch. It’s the only way we’ve done it since 2008 of community service.
Every job carries the Done Right Promise. If something isn’t right, we make it right. No paperwork fight. No arguing. We stand behind it.
Our Window Installation Services in Miramar
Casement Windows
Casement windows are one of the strongest designs for HVHZ wind loads because the sash presses into the frame seal when wind hits the glass. In Miramar, where a stalled August storm can hammer a west-facing elevation off Pembroke Road for hours, that matters. We install fused-frame impact casements with multi-point locking hardware, and the manufacturer’s HVHZ approval number is verified against the frame label before install. A typical impact-rated casement in Miramar runs $850 to $1,400 per opening installed.
Sliding Windows
Many of Miramar’s 1990s and 2000s planned-community homes, like Silver Lakes and Riviera Isles, were built with builder-grade aluminum sliders that met minimum post-Andrew code. Twenty-five years of salt-laden air later, the interlock seals are worn and wind-mitigation inspectors are flagging them as non-impact. We replace those with impact-rated sliders that carry an HVHZ designation, and we handle the Broward County permit and inspection on every one. Installed pricing in Miramar typically runs $900 to $1,600 per unit depending on width and frame material.
Fixed & Picture Windows
Fixed windows in two-story Miramar living rooms and stairwells take direct wind during hurricane season, so the glazing package matters as much as the frame. We supply laminated impact glass with Low-E coatings sized to the opening, and because the unit is non-operable, we anchor the frame to the rough opening with HVHZ-compliant fasteners. A large fixed or picture window in Miramar usually runs $700 to $1,800 installed, depending on square footage and whether the frame is aluminum or vinyl.
Single & Double Hung Windows
Older eastern Miramar homes from the 1950s through the 1970s often still have single-pane aluminum-frame hung windows. Replacing them with impact-rated double hung units changes how the whole room feels, especially on lots that back up to lakes or canals where reflected heat is real. We also do single hung where the opening is smaller or the homeowner prefers the simpler sash. Expect $700 to $1,300 per hung window installed in Miramar, with the HVHZ label confirmed at inspection.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Miramar
We’re an authorized installer for more than a dozen manufacturer lines, and in Miramar we lean heavily on for their HVHZ-documented impact lines. Some manufacturers sell an impact window that carries only a Florida statewide approval, no HVHZ designation. That window will not pass a Broward County inspection in Miramar. We quote manufacturer lines side by side on paper so you can see the difference, and we stock common parts locally so replacement hardware doesn’t mean a two-week wait. If the pane is not true, the job is not done.
Common Window Installation Problems We See in Miramar Homes
- Non-HVHZ windows failing inspection. A window carrying only a standard Florida statewide approval, without the explicit HVHZ designation, fails Broward County inspection. The contractor is then on the hook for a full change-out. We check the approval number before ordering, not after.
- Corroded jalousie frames in eastern Miramar. Pre-1994 jalousie frames corrode from decades of salt-laden Atlantic air to the point that new flashing tape won’t seal. Water intrusion during stalled summer storms is the predictable result. These jobs need full frame replacement, not a sash swap.
- Builder-grade sliders losing interlock seal integrity. In Silver Lakes and Monarch Lakes, wind-mitigation inspectors routinely flag 1990s aluminum sliders as non-impact because the interlock seals have worn. That triggers an insurance non-renewal notice. An HVHZ-rated replacement fixes the issue and the paper trail.
- Weatherstripping breakdown from inland humidity. Miramar’s inland Broward location still gets enough Atlantic humidity and salt air to break down weatherstripping faster than Central Florida markets. A sliding window that binds in July often just needs new seals, and our maintenance check covers that check.
Pricing for Window Installation in Miramar, FL
Window installation in Miramar runs from about $700 per opening for a smaller fixed or single hung unit to $1,800 or more for a wide impact-rated sliding door or a large custom picture window. Casement windows typically land between $850 and $1,400. Bay and bow windows start around $2,500 and go up with size and finish.
What changes the price in Miramar specifically: whether the existing frame is aluminum or wood, whether the rough opening needs repair from years of water exposure, and whether the unit carries a Miami-Dade NOA versus a cheaper statewide-only listing. A compliant quote includes the permit, the inspection, and both warranty layers registered in writing. A cheap quote often omits the permit and hopes the inspector doesn’t check the label. Call (386) 516-5343 for a written line-item quote. Estimates are free, and we don’t add surprise line items to the bill.
We Also Serve Cities Near Miramar
Our crews cover the surrounding South Florida communities as well: Miami Gardens, North Miami, North Miami Beach, and Ojus. If you’re nearby and wondering if you’re in our service area, call and ask. We’ll give you a straight answer. See our Window Installation in Miramar page for the full local breakdown.
Serving Miramar, FL - Our Local Coverage Area
We’re based in the Miramar area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Miramar
Yes. Broward County requires a permit for virtually every residential window and door replacement, including same-size, same-style swaps. A county inspector physically verifies the HVHZ-specific product approval number printed on the unit’s label before signing off. TruePane pulls the permit and handles the inspection on every Miramar job. Call (386) 516-5343 if you’re unsure whether a previous contractor did it right.
An HVHZ approval means the window has been tested and certified for Florida’s High-Velocity Hurricane Zone, the most stringent fenestration standard in the country. Miramar falls entirely within that zone, so every replacement window must carry either a Miami-Dade NOA or a Florida statewide approval with an explicit HVHZ designation. A standard impact rating without that designation fails Broward County inspection, no matter what the marketing says.
It needs a specific label. The window must carry a Miami-Dade NOA or a Florida statewide approval that explicitly lists as HVHZ. Many impact-rated products sold elsewhere in Florida do not carry that designation and cannot legally be installed in Miramar. We verify the approval number against the physical label on the frame before installation, and the Broward inspector verifies it again after. A window carrying only a standard statewide approval will fail inspection and the contractor is liable for the change-out. That’s why we check first.
Wind-mitigation inspectors check for impact-rated openings and HVHZ-compliant documentation. Homes with pre-1994 non-impact windows or failed builder-grade sliders are being canceled or surcharged by South Florida carriers. When we install HVHZ-rated windows in Miramar, both warranty layers are registered in writing and the permit and inspection create the paper trail insurance companies want to see. That documentation can be the difference between a policy renewal and a non-renewal notice. Call (386) 516-5343 to talk through what your policy currently requires.
A compliant quote includes the Broward County permit, the HVHZ-specific product approval verification, the inspection, both manufacturer warranty layers registered in writing, and the Done Right Promise. A cheap quote often leaves out the permit, supplies a window with only a standard Florida statewide approval, and hopes the inspector doesn’t check the label. When the inspection fails, the homeowner is left holding a window that can’t legally stay. We give you the compliant quote in writing, side by side with manufacturer lines, so you can see exactly what you’re buying. Call (386) 516-5343 for a free estimate.
In Silver Lakes, our crew replaced a 1998 builder-grade sliding window with a fused-frame, impact-rated casement. The old sash had aluminum oxide pitting from salt-laden air, and the label inside the jamb showed only a non-HVHZ Florida approval. Broward’s inspector verified the new Miami-Dade NOA on the frame before signing off. That’s the difference between a job that passes and a job that doesn’t, and it’s the only way we work in Miramar.
Call (386) 516-5343 to schedule your free window installation estimate in Miramar. A live person answers, 24 hours a day, 7 days a week. Not a voicemail tree. A square deal, in writing, with both warranty layers registered before the truck leaves your driveway.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Miramar and South Florida with code-compliant window and door installation.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.