Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Pembroke Park
Window installation in Pembroke Park comes down to one hard fact: every replacement, even a single unit, must meet Broward County’s High-Velocity Hurricane Zone code. That means a current Florida Product Approval or Miami-Dade NOA, a full permit review, and an inspector who will check. We handle that paperwork and that standard on every job, from one casement window on Southwest 48th Avenue to a whole-house retrofit near Hallandale Beach Boulevard. If you need straight answers and an install that passes on the first visit, call TruePane Windows & Doors at (386) 516-5343.
Why TruePane Windows & Doors Is Pembroke Park’s Preferred Window Installation Company
We work in Pembroke Park often enough to know the housing stock without looking at a map. Mostly 1950s to 1970s CBS homes, original jalousie frames, single-pane sliding units, and doors that bind in the July humidity. Dale Kessler founded this company on a rule that still hangs in the shop: if the pane is not true, the job is not done. Our Window Installation team carries that into every block opening we flash and every frame we square.
Pembroke Park homeowners tend to call us after another crew has already tried. We see failed inspections from product lines that did not carry a current Miami-Dade NOA, we see fogged glass that a handyman swapped without addressing the failed seal, and we see jalousie frames so oxidized the sash will not close against the stop. That work gets corrected, and the homeowner gets what they paid for the first time. Our technicians are background-checked and uniformed, and they measure every opening twice before quoting.
What we will not do is hand you a number over the phone and call it an estimate. We write manufacturer lines side by side on paper so you can see the price difference between a ViewLux casement and a Marvin double hung before you spend a dollar. Both warranty layers get registered in writing before the truck leaves the driveway. That is the Keystone Standard, and it is the only way we install.
We also answer the phone. A live person, twenty-four hours a day, seven days a week. Not a voicemail tree and not a regional call center. When a Pembroke Park homeowner has a question about a permit inspection or a warranty registration, they get a person who knows this trade.
Our Window Installation Services in Pembroke Park
Casement Windows
Casement windows are the workhorse replacement for Pembroke Park’s original jalousie units. A fusion-welded frame with stainless steel hinges and a multi-point lock gives you a seal that jalousie glass never could, and the crank mechanism holds up to decades of humidity without the aluminum frames oxidizing at the corners. We set them in block openings with butyl flashing at every jamb, which keeps air and water where they belong. A properly installed casement in Pembroke Park will drop your cooling bill in the first full summer, simply because the air stops leaking through the old jalousie slats.
Impact-Rated Sliding Windows
Original 1950s and 1960s sliders in Pembroke Park have single-pane glass and aluminum tracks that have been grinding for sixty years. We replace them with impact-rated sliders that carry a Miami-Dade NOA, which means the laminated glass passes the same missile-impact testing used in Miami. The frame gets a stainless steel roller assembly and a positive interlock at the meeting stile. You get a window that slides with two fingers and does not have to be boarded up when a hurricane watch hits Broward County.
Fixed & Picture Windows
Fixed windows are where homeowners see the biggest insurance benefit per dollar spent. A large picture window on a Pembroke Park CBS home, if it is not impact-rated, is the single largest opening a wind-borne branch can find. We install fixed units with laminated impact glass and structural silicone glazing, sized to the existing opening so the block work stays intact. The insulating value matters too: a Low-E fixed window on a west-facing wall near Southwest 40th Avenue cuts afternoon heat gain enough that the air conditioner stops cycling as hard in August.
Awning Windows
Awning windows make sense in Pembroke Park because they vent while keeping rain out during the afternoon downpours that come through from June to October. A properly installed awning seals tight at the bottom when closed and sheds water away from the sill when open. We install them in bathrooms and kitchens where a casement crank would interfere, always with impact-rated glass for the HVHZ code requirement. The frame is fusion-welded vinyl or aluminum, never the snap-together stuff that sags after a few humid summers.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pembroke Park
We are an authorized installer for more than a dozen manufacturer lines, and we stock parts locally for Pembroke Park work so we are not waiting on a truck from Orlando when an opener fails. That includes Andersen, Pella, and Marvin, along with impact-focused lines like Simonton and PGT. When we quote a job, we put the options side by side on paper with the warranty terms written out, both manufacturer layers, so you know what a Marvin casement costs versus a ViewLux casement and why. No vague “manufacturer warranty applies” language. The durations are stated, and we register them before the truck leaves. That is part of the Done Right Promise: the work is guaranteed, and so is the paperwork behind it.
Common Window Installation Problems We See in Pembroke Park Homes
- Failed jalousie frames from inland humidity. Pembroke Park’s humidity does not need to be coastal to corrode aluminum. Jalousie frames from the 1960s oxidize at the corners and the crank mechanisms seize, and the glass itself provides almost no insulating value. The fix is complete frame-out replacement, not glass replacement.
- Fogged single-pane glass with no insulating gas left. When the seal on an original window fails, humidity gets between the panes and you see that permanent haze. The argon or krypton fill is gone, the insulating value is gone, and the window is doing nothing for your electric bill. In Pembroke Park, that failed seal is a cooling-cost problem almost year-round.
- Weatherstripping rotted to nothing on sliding units. Original sliders from the 1970s used felt or vinyl weatherstripping that hardens and falls out after decades of humidity and heat. The window still closes, but it does not seal, and the air leakage adds up on the power bill. We see this on nearly every original slider in Pembroke Park.
- Non-NOA products that failed Broward permit review. This is the expensive one. A homeowner replaces windows with a product line that looks impact-rated but does not carry a current Miami-Dade NOA. The inspector catches it, the permit stalls, and the homeowner pays for re-work. We verify NOA compliance before we ever pull the permit.
Pricing for Window Installation in Pembroke Park, FL
Here are honest numbers for the Pembroke Park market. A single impact-rated casement window, installed and permitted, typically runs $900 to $1,600. A standard impact sliding window runs $700 to $1,400 per unit. A large fixed or picture window with laminated impact glass will run $1,200 to $2,800 depending on the square footage and framing condition. Full frame-out replacements, which nearly all Pembroke Park homes need because the original jalousies and sliders do not have a frame worth retrofitting, run 15 to 25 percent higher than an insert replacement. The HVHZ product approval and Broward permit review add costs that an inland contractor will not quote you, and that is exactly where the cheap bid gets expensive when the inspector fails the work.
We offer a free estimate, written out line by line, with the manufacturer warranty durations stated. We also have a permanent 5 percent discount for seniors and veterans, and a free written repair estimate. Call (386) 516-5343 and we will schedule a time to measure and quote. The quote is free, and it will be specific to your block opening and your window line choice.
We Also Serve Cities Near Pembroke Park
Our crews regularly work in Miami Gardens, North Miami, North Miami Beach, and Ojus, so if you are just outside Pembroke Park, we can still help. If you live in town, you are already in the core of our service area for Window Installation in Pembroke Park. The same crew, the same standards, and the same permit discipline apply whether the job is on Southwest 48th Avenue or a few blocks north.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Pembroke Park
Yes. Pembroke Park sits in Broward County’s High-Velocity Hurricane Zone, and the code does not make exceptions for a single-unit swap. Every replacement window must carry a current Florida Product Approval or Miami-Dade Notice of Acceptance, and the permit must go through full Broward review. Any contractor who says otherwise is going to cost you a failed inspection. Call (386) 516-5343 and we will verify your product line’s NOA status before the permit is ever pulled.
No. Jalousie frames from Pembroke Park’s 1950s and 1960s housing stock are aluminum, non-thermal, and structurally incapable of holding an impact-rated laminate to HVHZ wind standards. You would be replacing glass in a frame that still leaks air, still oxidizes, and still fails the permit review. The cost-effective fix is a full frame-out replacement with a fusion-welded impact-rated unit. We quote that honestly, and the price reflects the work it actually takes.
The fog is a failed seal. Pembroke Park’s year-round humidity works its way into old aluminum frames, the seal between the glass and the spacer degrades, and moisture gets trapped inside the unit. Once the seal fails, the insulating gas is gone and the window is doing almost nothing for your cooling bill. Original single-pane windows from the 1960s and 1970s fail at very high rates here because the heat and humidity never let up. We replace them with new sealed units that carry long-term manufacturer warranties, registered in writing.
Most Florida carriers apply a wind mitigation credit for impact-rated windows that carry a Miami-Dade NOA. The credit shows up as a discount on the windstorm portion of your premium, and in some cases it is substantial. You will need a new wind mitigation inspection after the install, and we make sure the product approval documentation is in your hands so the inspector can verify it. That paperwork is part of the Keystone Standard, not an afterthought.
Pembroke Park is inland, but Broward County’s HVHZ designation forces a coastal-grade window regardless. That means laminated impact glass, stainless steel hardware, structural mullions, and a product approval that passes the same debris-missile testing used in Miami-Dade. An inland-spec window would be cheaper, but it would fail the permit review and it would not survive the storm it is supposed to protect against. The price gap between the two specs is real, and so is the cost of the cheap version ten years in. We quote the coastal-grade spec on every Pembroke Park job because it is the only legal option, and because we will not install a window we would not put on our own mothers’ houses. Call (386) 516-5343 for an exact quote on your home.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pembroke Park and surrounding Broward County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.