Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Window Installation: The Miami Gardens Owner’s Guide
We install and replace CGI window units throughout Miami Gardens, with most standard single-window installations running between $1,150 and $2,400 depending on size, series, and whether the frame needs rebuilding. If you’re holding a CGI window that’s fogged, binding, or leaking after a storm, we carry the common replacement components on the truck and can typically complete the job in one visit. Most Miami Gardens homeowners don’t realize a CGI window is failing until water collects on the interior sill or the sash refuses to close squarely in August humidity.
CGI builds its windows specifically for South Florida’s wind-load requirements, which means a generic replacement part from a supply house often fits poorly and voids whatever warranty protection remains. That’s the gap this page is meant to close. We’re an independent installer, not affiliated with CGI, but we’ve been measuring, setting, and sealing their product lines long enough to know what fails first and what it takes to fix it properly.
Key takeaways:
- CGI window installation in Miami Gardens runs $1,150 to $2,400 per opening, installed
- We stock common CGI-compatible components on the truck for same-visit replacement
- CGI frames are engineered for Miami-Dade wind loads; generic parts weaken the system
- Workmanship is covered by our Done Right Promise, in writing
- A live person answers at (386) 516-5343, 24 hours a day
Which CGI Models This Applies To
CGI’s residential product line in Miami Gardens breaks down into three families: the Estate Collection (aluminum single-hung and casement), the Sentinel Series (impact-rated horizontal roller and picture windows), and the Targa Series (heavier aluminum frames built for large openings and second-story exposure). Each series uses different balance systems, weatherstripping profiles, and frame extrusions, so matching the replacement part to the series is the first step, not an afterthought.
Every CGI unit carries an AAMA certification label, usually on the interior frame or the top sash. That label lists the series, the size, and the wind-load rating, and it’s the fastest way to identify what you’re working with. If the label has faded or been painted over, we measure the glass thickness, the frame depth, and the balance shoe profile to match the part. On OEM versus aftermarket: for structural components like balances, hinges, and frame corners, we use OEM or exact-spec equivalents, because a quarter-inch difference in a balance shoe turns a smooth-operating sasah into one that binds in July. For non-structural wear items like wool pile and silicone weatherstripping, a quality commercial-grade replacement performs just as well and costs less than the factory-branded strip.
One compatibility gotcha we see regularly in Miami Gardens: CGI’s older single-hung models from the early 2000s use a narrower balance channel than current production. A generic replacement balance won’t seat properly, and forcing it damages the frame extrusion. We keep both the old and new profile balances in stock specifically to avoid that conversation.
Signs Your CGI Window Installation Is Failing
- Condensation between the panes. The seal between the glass lites has failed, which means the argon or krypton fill has leaked out. This is the most common CGI failure in Miami Gardens, where ten months of heat and humidity pressure-cycles the seals.
- The sash drags or binds when opening. The balance system has lost tension or the shoe has cracked. On CGI windows, this often traces back to a corroded balance spring from salt air drifting inland off Biscayne Bay.
- Water on the interior sill after a hard rain. The weatherstripping has compressed or the weep holes are clogged with debris. CGI’s weep system is narrow by design for wind resistance, which means it plugs faster than most.
- Visible frame separation at the corners. The corner keys or gussets have worked loose. This is more common on Targa Series frames with large expanses of glass, where wind load transfers stress through the corners.
- The lock no longer engages or the sash sits out of square. This is usually a frame alignment issue, not just a lock problem. We see it most often in Miami Gardens homes with shifting concrete slabs, where the rough opening has drifted and transferred pressure into the frame.
Replacement Cost & What’s Included
A full CGI window installation in Miami Gardens typically ranges from $1,150 to $2,400 per opening, installed, with the variance driven by series, glass package, and whether the existing frame can be reused. Parts replacement alone (weatherstripping, balances, hinges, latches) runs $90 to $360 per window depending on what’s failed. We quote the parts and labor as separate line items so you see exactly what you’re paying for, and that number doesn’t change once we start pulling the old window apart.
| Scope | Typical Range | Included |
|---|---|---|
| Single-hung replacement, Estate Collection | $1,150 to $1,800 | Removal, new unit, flashing, interior trim, haul-off |
| Casement or picture window, Sentinel Series | $1,400 to $2,200 | Removal, new unit, flashing, alignment, haul-off |
| Large-opening Targa Series, structural frame work | $1,800 to $2,400 | Frame rebuild or reinforcement, new unit, flashing, trim |
| Parts-only service call (weatherstripping, balance, latch) | $90 to $360 | Diagnosis, part, installation, window operation check |
Every installation includes written registration of both manufacturer warranty layers before our truck leaves your driveway, and the workmanship itself is guaranteed for 90 days under our Done Right Promise. If something’s out of true, we make it right without paperwork arguments.
DIY or Call Us?
Replacing weatherstripping or cleaning weep holes is a reasonable weekend job for a careful owner. Anything involving the balance system, frame alignment, or glass replacement should go through a glazier who works with impact-rated frames daily. CGI balances are tensioned specifically for the weight of impact glass, and releasing one without the proper tooling can snap the spring and send the balance shoe through the vinyl track. Glass is heavy, frames are load-bearing, and the mistakes cost more than the service call.
If you’re seeing any of the failure signs above, call (386) 516-5343. We’ll measure twice, match the part to the series, and put the quote in writing before any work begins.
FAQs
CGI windows in Miami Gardens typically last 20 to 30 years with proper installation, though the weatherstripping and balance systems generally need replacement every 7 to 12 years due to heat, humidity, and salt air. A properly maintained CGI frame can outlast the neighborhood, which is why we stock the wear parts instead of pushing a full replacement when a balance and new wool pile will do. Call (386) 516-5343 for an honest assessment of what’s worth fixing on your window.
Yes, in roughly two-thirds of Miami Gardens service calls, the window itself is sound and the problem is a failed balance, compressed weatherstripping, or a worn latch, all of which we replace on the spot. We repair what’s repairable and tell you plainly when the seal has failed or the frame has twisted beyond correction. Call (386) 516-5343 and we’ll give you the straight answer, not a sales pitch.
A standard single-window replacement takes 3 to 5 hours from start to finish, including removal, flashing, setting the new unit, interior trim, and haul-off, and most jobs are completed the same day. Larger Targa Series openings or frame rebuilds may run into a second day if concrete work or structural reinforcement is involved. We’ll tell you the timeline in writing when we quote the job at (386) 516-5343.
We stock the most common CGI wear components on the truck for Miami Gardens service calls: balance systems for both old and new profile channels, wool pile weatherstripping, silicone weatherstripping, latches, hinges, and frame corner keys. Less common parts, like factory-matched glass packages, take 1 to 2 weeks to order. Call (386) 516-5343 and we’ll tell you what’s on the truck today and what has to come from the factory.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Miami Gardens and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.