Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Custom Windows & Doors in Miami Gardens: What to Know First
We handle custom windows and doors for CGI owners throughout Miami Gardens as an independent CGI service provider. Most custom jobs in our area run two to four weeks from measurement to completed install, depending on the size of the glass and whether it’s a stocked line or a special-order opening. Pricing is honest and line-itemed before work begins, and the estimate is free. This page is for homeowners in Miami Gardens who own CGI windows or doors and need custom work done by a crew that knows the product line. Call (386) 516-5343 and you’ll reach a live person, not a voicemail tree.
How CGI Products Fail - and How We Fix Them
CGI builds a strong impact product. No argument there. But after nearly three decades of setting and sealing glass in South Florida, we’ve seen the same failure patterns repeat on custom openings, and most of them trace back to installation shortcuts rather than the extrusion itself. Here’s what we find most often on CGI products in Miami Gardens homes.
- Roller sag on Estate Collection sliders. The heavier CGI Estate Series sliding doors sit on rollers that wear unevenly when the track isn’t dead level. The door starts dragging on the latch side, then binds in July when the aluminum expands in Miami Gardens heat. We re-shim the panel, replace the rollers with the correct load rating, and set the reveal so it doesn’t come back next summer.
- Weep-hole blockage on Estate and Targa series windows. Miami Gardens gets an average of 61 inches of rain a year, and when weep holes clog with dirt or overspray from landscape work, water sits in the track and migrates into the frame. Homeowners mistake it for a seal failure. We clear the weeps, check the internal drainage channels, and replace any gasketing that’s hardened from the standing water.
- Fogged glass on older CGI Sentry and Estate fixed units. The seal between the laminated impact layer and the insulated glass fails, usually from exposure to the same heat and humidity we all live with in Miami Gardens. Once the seal goes, the only real fix is replacing the glass pack. We order the correct thickness for the frame’s glazing pocket and register the new glass warranty in writing before we leave the driveway.
- Stripped keeper screws on Targa casement windows. This one is small but common. The original screws were set too fast at the factory, and after a few years of cranks and wind pressure, the keeper lets go. The window won’t lock, which on an impact product is a real problem. We drill and tap the hole, set a stainless screw with thread-lock, and realign the cam.
- Rough openings that were never truly square. Some CGI installs in Miami Gardens were set into openings that were out a quarter inch or more. The unit gets racked, the operating hardware fights the frame, and the locking points stop lining up. We pull the unit, correct the opening, and reset the window plumb and true. That’s the founding rule around here: if the pane is not true, the job is not done.
Our CGI Custom Windows & Doors Process
- 1
You call, a person answers. A live person picks up 24/7. No voicemail, no callback form. We’ll ask about the symptom, the window or door type, and whether the unit is a stocked line or a custom opening.
- 2
We come out and measure twice. A background-checked, uniformed technician shows up on time, measures the opening twice, and checks the existing unit for the root cause. You get a written line-item quote on paper before we leave.
- 3
We decide parts the honest way. For CGI units that need OEM hardware or factory glass packs, we order them. For units where a quality aftermarket part does the job better than the original, we tell you why and show you the comparison. No mystery parts.
- 4
We do the work in one visit when the parts are in hand. We set the unit, seal it, and check every locking point before we clean up. Most jobs go in a single visit.
- 5
We register both warranty layers. The Keystone Standard means both manufacturer warranty layers are registered in writing before the truck pulls away. You get the paperwork, not a promise.
- 6
We stand behind it for 90 days. If it’s not done right, we make it right. No arguing, no fine print.
What CGI Custom Windows & Doors Costs in Miami Gardens
Custom work on CGI products doesn’t come with a single flat price, and anyone quoting one over the phone without seeing the unit isn’t doing you any favors. Here’s what we see most often in Miami Gardens, based on the work we actually do:
- Replacing the glass pack in a fogged CGI Estate fixed unit: $650 to $1,200, depending on glass size and lamination thickness.
- Rebuilding a sagging Estate Series sliding door with new rollers and track re-shimming: $350 to $700 per panel.
- Full custom replacement of a Targa casement window with new impact glass: $900 to $2,400 per unit, depending on size and finish.
- Custom architectural grille or SDL work on an existing CGI unit: $300 to $900 per window, depending on the pattern and material.
The price moves on three things: glass area, whether the opening is stocked or special-order, and the condition of the existing frame. Call (386) 516-5343 for a free estimate with written line-item pricing.
Why Miami Gardens Homeowners Call TruePane Windows & Doors for CGI Work
Dale Kessler founded TruePane Windows & Doors in 2008 out of a straightforward complaint: out-of-true installs and voided warranties were problems worth fixing permanently. He grew up off NW 183rd Street in Miami Gardens, learned the trade through Miami Dade College’s Building Construction Technology program, and has been measuring, setting, and sealing windows and doors in South Florida for going on three decades. He still checks his own flashing tape before the truck leaves a job site. We’re an authorized installer for more than a dozen manufacturer lines, and when a CGI unit is beyond repair or a customer is weighing a replacement, we’ll quote CGI side by side with, and PGT on paper so you see exactly what you’re buying. Every job is covered by the Done Right Promise. We’ll be there when we say, and we stand behind it.
FAQs
We replace single windows and doors all the time in Miami Gardens. There is no requirement to buy a full set. We’ll match the new unit’s glass, frame finish, and performance rating to your existing CGI openings so the replacement doesn’t stand out as a patch job.
No. Work performed by a qualified independent CGI service provider does not void your warranty. We follow manufacturer installation and parts standards, and we register both warranty layers in writing under The Keystone Standard. That means the owner keeps the paper trail, not just the promise. Call (386) 516-5343 and we’ll explain exactly what’s covered before any work starts.
Most stocked-line replacements are done in one visit. Custom-shaped windows, oversized glass panels, and special-order CGI units typically run two to four weeks from measurement to install. We’ll give you a real completion window upfront, and we’ll be there when we say.
Repair fixes the problem where it sits. Replacement means we pull the old window or door and set a new one. Our rule is this: if the frame is square, the tracks are sound, and the glass is not compromised, repair usually makes more sense. If the frame has been racked or the unit was never set true in the first place, replacement is the more honest call, and we’ll show you both options with real numbers. Call (386) 516-5343 for a free estimate.
Yes. We do custom shape windows, oversized glass panels, architectural grilles and SDLs, and full commercial storefront glazing in Miami Gardens and nearby areas. Measure twice, seal it right, and put it in writing. That is how we work. Call (386) 516-5343 to schedule a free estimate.
Get a Free Estimate for CGI Custom Windows & Doors in Miami Gardens
If your CGI windows or doors are fogged, binding, sagging, or just not locking the way they should, call (386) 516-5343. A live person answers around the clock, and we’ll schedule a time that works for you. Estimates are free, written, and line-itemed before any work starts. We’re TruePane Windows & Doors, and we stand behind it.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Miami Gardens and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.