Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTrusted Custom & Geometric Windows for Miami Gardens Homeowners
Custom and geometric windows in Miami Gardens cost between $1,400 and $6,800 per unit installed, depending on the opening size, glass package, and frame material. A standard arched top over a fixed picture window with impact glass typically runs $2,200 to $3,900, while oversized radius windows and compound geometric shapes can reach $6,000 or more. We’ve been setting these windows in Miami Gardens homes for years, and the call we hear most often is from a homeowner who has an odd-shaped opening another company either refused to touch or left leaking.
TruePane Windows & Doors was founded by second-generation glazier Dale Kessler, and our crew works from one rule that has governed every install since day one: if the pane is not true, the job is not done. We answer the phone at (386) 516-5343 with a live person, every time, and we back every custom window with our Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing before our truck leaves your driveway in Miami Gardens.
Key Takeaways
- Custom and geometric windows in Miami Gardens run $1,400 to $6,800 installed per unit, with most arched and radius work falling between $2,200 and $3,900.
- Every opening is measured twice and quoted on paper, side by side across manufacturer lines, before work begins.
- Impact-rated custom shapes are available and installed to Miami-Dade County High Velocity Hurricane Zone code.
- The Done Right Promise means if it is not done right, we make it right, with no paperwork fights.
- Call (386) 516-5343 for a free, no-obligation estimate on any custom or geometric window project.
What Our Custom & Geometric Windows Service Includes
Custom windows are not stock sizing with a few shims and some caulk. A true custom window is built to your opening, your glass spec, your design intent, and your Miami Gardens home’s exposure to sun, wind, and storm-driven rain. We take on the shapes and openings that get passed over by production shops: true arches, eyebrow tops, radius corners, octagons, hexagons, trapezoids, and oversized wall spans that need engineered headers and reinforced frames. Here is what we handle under this service.
Custom Impact Windows
Custom impact windows are built to the same Miami-Dade County High Velocity Hurricane Zone standards as our stock impact lines, but they are fabricated to a non-standard opening size or shape. These are the units homeowners in the Lake Lucerne and Bunche Park neighborhoods of Miami Gardens ask about most after struggling with plywood shutters on an arched master bath window that does not match any off-the-shelf shutter. TruePane quotes custom impact glass from manufacturers like PGT and CGI with side-by-side specs so you see the design pressure rating, the glass makeup, and the warranty terms on paper before you commit.
Geometric & Shaped Windows
Geometric and shaped windows cover the full range of non-rectangular glass: hexagons, octagons, pentagons, trapezoids, circles, half-rounds, and quarter-rounds. These units often act as architectural focal points, and a window that is out of square by even a quarter inch will catch the eye of anyone who walks into the room. Our technicians frame, flash, and glaze every geometric unit so the sight lines run true, and we register both warranty layers in writing before the job is closed out.
Arched & Curved Windows
Arched and curved windows include full-radius arch tops, elliptical eyebrows, and segmented arcs that require templated glass and curved frame stock. The most common failure we see in Miami Gardens is an arch that was measured with a flexible tape but fabricated to a true radius, which leaves a gap at the crown that gets filled with expanding foam and painted over. We template every radius window directly from the rough opening, because the rough opening is the only measurement that matters.
Oversized Openings
Oversized openings are spans that exceed standard production window dimensions, typically anything over 72 inches wide or 60 inches tall for a fixed unit. These jobs involve engineered glazing, heavier glass, reinforced mullions, and often a header upgrade, which is exactly the kind of work that separates a window installer from a glazier. If you have a Miami Gardens ranch with a picture wall or a lofted gable end that needs glass, call us at (386) 516-5343 and we will measure, engineer, and price it honestly.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Custom & Geometric Windows
We are an authorized installer for more than a dozen manufacturer lines, and that matters when the window is custom because warranty coverage depends entirely on proper installation and registration. We service and install ES Windows custom and architectural lines, and we have completed dozens of ES radius and trapezoid installations across Miami Gardens and North Miami Beach. The ES product line leans toward modern architectural profiles, and we know which of their series accept impact glass and which do not.
We also install and service ECO Window Systems and Mr-Glass units, both of which build custom impact-rated shapes for South Florida exposure. For homeowners who want a door-window combination with a custom transom or sidelite, Therma-Tru offers fiberglass entry systems with geometric glass options that we route and glaze in the field. Whether you have one of these brands, a PGT or CGI arch, or a window from a manufacturer that has since been acquired or retired, we can quote, order, or rebuild it. If you aren’t sure what brand is in your opening, we will identify it when we measure.
Read more about how we approach every install on our home page, or see how custom work fits into a broader replacement plan by reviewing our Custom & Geometric Windows in North Miami page.
Signs You Need Custom & Geometric Windows Right Now
- Condensation or fog between the panes. A failed seal on a custom shape lets humid Miami Gardens air into the insulated glass unit, and the fog never clears from the inside. Once the desiccant in the spacer is saturated, the only correct repair is a new glass unit cut to the original template.
- Visible daylight or a draft at the edge of a radius or angle. Custom openings settle over time, and a frame that was tight in 2008 may have opened a gap at the miter joint by now. Even a 1/8-inch gap at a curved corner will push your cooling bill up noticeably by August.
- Water staining on drywall or trim below a shaped window. Geometric windows often lack proper sill flashing because the installer did not want to cut flashing to an odd angle. The stain shows up below the window, not around it, because water runs down the wall cavity before it wicks into the drywall.
- Cracks running from the corner of an oversized or arched opening. An undersized header over a wide custom window will deflect, and the drywall at the upper corners will crack in a stair-step pattern. This is a structural problem first and a window problem second, and it needs a glazier who will be honest about the header before ordering glass.
- The window will not close flush after the frame settles. Miami Gardens sits on muck and limestone, and every slab moves a little over decades. A geometric window that was square in 1995 may bind at the latch by 2025, and the fix is re-squaring the frame, not planing the sash.
If one of these sounds familiar, call us at (386) 516-5343. We will send a uniformed, background-checked technician to measure and tell you what is actually wrong, not what is easiest to sell.
Our Custom & Geometric Windows Process - Step by Step
- 1
Measurement and templating. Every custom window starts with a measurement of the rough opening, not the old frame. For arches and radii, we template the opening with a physical pattern so the glass fabricator receives an exact shape, not a set of dimensions that may or may not describe the curve correctly.
- 2
Side-by-side quote on paper. We quote the job across the manufacturer lines that actually build the shape you need, with each line item spelled out: glass package, impact rating if required, frame material, finish, hardware, and warranty duration. You see what you are buying before you sign anything.
- 3
Permits and engineering. For oversized openings, impact-rated shapes, or any job that touches a header, we pull the permit and coordinate with the structural engineer. Miami Gardens enforces Miami-Dade County code, and we do not install a window that has not passed the plan review it needs.
- 4
Installation and sealing. Our technicians remove the old unit, repair or square the frame, install the new window, and flash it to shed water the way the original builder should have. Every corner, miter, and radius is checked with a level and a square before the trim goes back.
- 5
Warranty registration and final walkthrough. Before we leave, we register both manufacturer warranty layers in writing, hand you the documents, and walk the opening with you. Covered by the Done Right Promise, any issue you find within 90 days gets corrected on our dime, without an argument.
How Much Does Custom & Geometric Windows Cost in Miami Gardens?
A fixed arched or radius window with standard insulated glass runs $1,400 to $3,000 in Miami Gardens. Add impact glass and you are looking at $2,200 to $4,900 per unit. A true custom geometric shape - hexagon, octagon, or trapezoid - falls between $1,800 and $3,800 with standard glass, and $2,800 to $5,500 with impact. Oversized picture or radius openings over 72 inches wide run $3,000 to $6,800 installed, depending on frame material, mullion engineering, and the header work involved. Custom impact windows built to HVHZ code sit at the top of the range because the glass, frame, and anchoring all carry Miami-Dade NOA requirements.
What changes the price: the opening size and shape, the glass package, whether the frame is vinyl, aluminum, or wood-clad, whether the existing header is adequate, and how much interior and exterior trim has to be reconstructed. The best way to avoid overpaying is to get a side-by-side quote with line items, which is exactly what we hand you when we measure. Our estimates are free, and the price we write down is the price on the final bill - no change orders, no surprise line items. Call (386) 516-5343 to schedule a measurement.
Custom & Geometric Windows Near Miami Gardens - Our Service Area
We serve Miami Gardens and the surrounding communities: Ojus, Opa-locka, Country Club, Golden Glades, Ives Estates, West Park, Westview, Pembroke Park, and Miami Lakes. Most custom window measurements in these areas are scheduled within a few days, and we carry enough standard glass stock to handle a surprisingly large share of shape work in one visit. If you live in North Miami Beach and have half-round windows from a 1980s spec home, see our Custom & Geometric Windows in North Miami Beach page for details specific to that area.
Serving Miami Gardens, FL - Our Local Coverage Area
We’re based in the Miami Gardens area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Custom & Geometric Windows in Miami Gardens
A custom or geometric window is any unit built to a non-standard size or shape - arches, circles, hexagons, trapezoids, eyebrows, or oversized fixed panes. Unlike stock windows, these units must be templated to the rough opening and often require custom glass fabrication. TruePane Windows & Doors measures, orders, and installs these windows with the same warranty registration process we use on every job in Miami Gardens.
Most single-unit custom window installations take one day once the unit arrives from the fabricator. Custom glass fabrication adds lead time - typically 2 to 6 weeks depending on the shape, glass package, and manufacturer. Oversized openings or projects with permitting and structural work can span multiple days, and we give you a written schedule before work begins. Call (386) 516-5343 for a timeline specific to your project.
A custom geometric window in Miami Gardens runs $1,400 to $6,800 installed, with most arched and radius units falling between $2,200 and $3,900 and impact-rated shapes running $2,800 to $5,500. The final price depends on size, shape, glass package, and whether structural work is needed. Our estimates are free and itemized so you know exactly what you are paying for.
Yes. We routinely rebuild or replace glass for custom units from manufacturers that have been acquired, renamed, or closed. We template the opening, identify the original frame and glass profile, and source a replacement or fabricate one through our supplier network. If your window cannot be accurately identified, we will tell you that on the first visit rather than selling you a guess.
For a window that is broken, leaking, or no longer secure, a live person answers our phone 24 hours a day, 7 days a week at (386) 516-5343. We will tell you over the phone what we can do to stabilize the opening and schedule the measurement. For a failed seal or a jammed sash that is still closed, we schedule the soonest available appointment that fits your calendar.
Every custom or geometric window job is covered by our Done Right Promise, and The Keystone Standard means both manufacturer warranty layers are registered in writing, with durations stated, before our truck leaves your driveway in Miami Gardens. If something is not done right within 90 days, we make it right without paperwork fights. The manufacturer warranty covers the glass and frame per the terms you receive in writing.
Clear the area around the window inside and out, move furniture back about 6 feet, and remove any wall hangings or window treatments. Our technicians handle the floor protection and the clean removal of the old unit, including disposal. Give us a call at (386) 516-5343 if you have a specific concern like pet access or a security system contact on the window.
Schedule Your Custom & Geometric Windows Service in Miami Gardens Today
Call (386) 516-5343 and ask for a free measurement and estimate on any custom or geometric window in Miami Gardens. A live person answers, we schedule at your convenience, and the quote we hand you is the price you pay. Done right, the first visit, with a square deal on the bill.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Miami Gardens since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.