Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Sliding Glass & Patio Doors in Miami Gardens: What to Know First
TruePane Windows & Doors provides independent repair and replacement of CGI sliding glass and patio doors across Miami Gardens, with most roller, track, and lock work completed in a single visit. A service call for a CGI slider that binds or won’t latch typically runs $180 to $390, and a full door replacement starts around $3,200 depending on the series and size. We are an independent CGI service provider, not a factory-authorized dealer, which means we answer to you on parts choices and warranty paperwork, not to a corporate script.
If you own a CGI slider in Miami Gardens and it’s dragging, sticking, or letting daylight through a worn seal, call (386) 516-5343 and you’ll get a live person who can talk through what you’re seeing before we ever schedule a truck.
Key Takeaways
- CGI sliders fail most often at the rollers, not the glass. Miami Gardens grit and humidity shorten roller life fast.
- Repair runs $180 to $390 in most cases; full panel replacement starts near $3,200.
- We register both manufacturer warranty layers in writing before we leave your driveway.
- No sales pressure to replace a door that only needs a track adjustment. We quote it straight.
- Live person answers 24/7 at (386) 516-5343.
How CGI Products Fail - and How We Fix Them
CGI builds a strong door. That said, every product line has its weak points, and in Miami Gardens those weak points show up sooner because of the heat, the salt in the air, and the fine limestone grit that finds its way into every track. Here’s what we actually see on service calls.
- CGI Estate Collection sliders with rollers that seize after 8 to 12 years. The nylon wheels on these doors wear flat on one side, and the bearing inside gets packed with grit. The door still moves, but you have to lean into it. We pull the panel, replace the roller assemblies with stainless-steel carriage replacements, and set the height so the door glides instead of grinds.
- CGI Classic and Estate patio doors with a failed “sealed” sweep. The bottom sweep on Miami Gardens doors takes direct sun and repeated wet-dry cycles. When it curls and hardens, you’ll feel air moving at floor level even with the door locked. We replace the sweep with a marine-grade profile and adjust the threshold so it compresses evenly across the full width.
- CGI sliding doors with a latch that won’t throw or a handle that flops at the 3 o’clock position. The multi-point lock rod inside these doors can drift out of alignment over time, especially if the door has been lifted or shimmed by a previous installer. We realign the keeper, lubricate the gearbox, and if the handle has stripped its internal spline, we swap in a factory-spec replacement rather than a cheap universal.
- CGI impact sliders with a track that’s bowed or bellied from settling slab work. Miami Gardens sits on limestone that shifts, and we’ve pulled more than a few CGI doors where the track had a 3/16-inch sag in the middle. The door drags no matter how new the rollers are. We check the track with a straightedge, shim or re-bed the low section, and set both panels to run true again.
- Older CGI door models with clouded glass where the unit has simply aged out. Once an insulated unit loses its seal in our humidity, no amount of cleaning fixes the fog. We measure the exact thickness and tint, order a replacement IGU that matches the original spec, and set it in clean with new gaskets so the door looks and performs like it should.
Our CGI Sliding Glass & Patio Doors Process
- 1
You call, a person answers. We ask about the symptom, the door model if you know it, and what you’ve already tried. Sometimes we can narrow it down over the phone and bring the right parts on the first trip.
- 2
We come out and diagnose. A background-checked technician measures panel sag, checks roller wear, inspects the track and threshold, and tests the lock and sweep. We measure twice before we quote anything.
- 3
You get the parts decision in writing. OEM rollers and hardware when the door is under warranty or when only factory parts will do. Quality aftermarket when it’s an older door and the factory part is backordered or priced past reason. You see the cost difference on paper before we order anything.
- 4
We do the work. Panel off, track cleaned and inspected, rollers or sweep replaced, lock realigned. We don’t rush a heat-weakened header or force a panel that’s fighting the frame.
- 5
We test it in front of you. The door opens with one hand. It latches without lifting. It seals along the bottom with no daylight at the threshold.
- 6
We hand you the paperwork. Both warranty layers registered, durations stated, and our Done Right Promise in writing. If the pane is not true, the job is not done.
What CGI Sliding Glass & Patio Doors Costs in Miami Gardens
Here are real price ranges we quote on CGI sliding door work in this market, based on what we’ve actually billed over the last several years.
- Roller replacement on one panel: $180-$280, including parts that match the door’s weight rating.
- Track clean, alignment, and lubricant: $140-$220 when no parts are needed.
- Latch, handle, or multi-point lock repair: $160-$310 depending on whether we’re rebuilding or replacing.
- Full bottom sweep and threshold gasket set: $190-$350.
- Replacement CGI slider installed: $3,200-$7,800 depending on width, series, and impact rating.
What moves the price: door weight and width, whether the original track can be salvaged, and whether the unit is still under manufacturer warranty for parts. Big doors with bowed tracks cost more than a simple roller swap. We don’t pad the bill and we don’t re-quote mid-job. Call (386) 516-5343 and we’ll give you a written, line-item estimate after we look at the door.
Why Miami Gardens Homeowners Call TruePane Windows & Doors for CGI Work
Dale Kessler grew up off NW 183rd Street, close enough to Hard Rock Stadium to know what a real Miami Gardens afternoon does to aluminum and glass. He went through the Building Construction Technology program at Miami Dade College, and he’s been setting and sealing doors in this county for going on three decades. That’s why our technicians get sent out to CGI jobs with the right parts on the truck and a straight edge in the bag.
We back every visit with the Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, before the truck leaves your driveway. If a PGT, CWS, ES Windows, or ECO Window Systems door is part of the house too, we quote those lines side by side so you’re never guessing. We’ll be there when we say, and we stand behind it. Call (386) 516-5343 for a square deal on your CGI door. Measure twice, seal it right, and put it in writing.
FAQs
Yes, we can often repair it while preserving the warranty, as long as the failed part is replaced with a manufacturer-approved component and the work is documented properly. We register both warranty layers in writing before we leave the job. Call (386) 516-5343 with your model and we’ll tell you straight what’s covered.
We use OEM parts when the door is under warranty or when factory hardware is the only sensible choice. On older CGI doors where factory parts are discontinued or backordered, we source quality aftermarket components that match the original weight rating and profile, and we show you the price difference in writing before ordering. Estimates are free at (386) 516-5343.
If the glass is clouded, the frame is corroded through, or the track has a structural bow, replacement usually makes more sense than repair. If the door drags, won’t latch, or leaks air at the sweep, repair typically costs $180 to $390 and we can usually do it in one visit.
Most non-storm repair calls are scheduled within a few days, and we often can do the job in a single visit because we diagnose over the phone and bring the likely parts with us. A live person answers at (386) 516-5343, and we’ll give you a straight arrival window before you commit.
No. We quote line-item prices after diagnosis, and that’s the number on your bill unless we uncover something structural that you approve in writing first. No surprise line items, no re-quote at the curb. That’s the square deal, and it’s how we’ve done business since 2008 in this community.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Miami Gardens and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.