Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
VLX 100 Pivot Door in Miami Gardens, FL | TruePane Windows & Doors
The VLX 100 Pivot Door is a heavy-duty aluminum entry door that rotates on a vertical center axis instead of traditional side hinges. It’s the kind of door that turns a front entry into a defining architectural feature. Oversized glass panels, clean lines, and a pivot mechanism that lets a 60-inch-wide slab swing effortlessly open. In Miami Gardens, we’re seeing more homeowners and builders choose pivot doors for modern renovations and new construction because they create a sense of arrival that standard hinged doors simply can’t match. TruePane Windows & Doors is an authorized ViewLux installation partner, which means we spec, install, and service the VLX 100 according to manufacturer requirements and AAMA installation standards. Call (386) 516-5343 to discuss your project.
Product Overview - VLX 100 Pivot Door
The VLX 100 is built around a simple idea: the door should be a centerpiece, not an afterthought. The pivot mechanism shifts the door’s weight from side-mounted hinges to a vertical axis point, allowing much wider slabs than a traditional hinge system can support. That opens up design possibilities, from full-glass entry panels to dramatic oversized doors that flood a Miami Gardens foyer with natural light.
The frame is extruded aluminum with a wall thickness of 0.098 inches, which is heavier than what you’ll find on standard residential entry doors. This isn’t an off-the-shelf product. It’s engineered for weight, wind, and years of daily use. The oversized glass panels sit within a minimal frame profile of just 2.56 inches, which maximizes glass area while keeping the structural integrity of the aluminum intact. The result is a door that feels substantial when you operate it, yet visually reads as nearly all glass. That’s the balance most architectural pivot doors chase and few achieve.
For Miami Gardens homeowners, the VLX 100 works particularly well on contemporary single-family homes, mid-century remodels, and custom builds where the entry sequence matters. It’s also a popular choice for interior applications, like a home office or primary suite divider, where the pivot action creates a completely different spatial experience than a standard swinging door. The short description we give clients is simple: heavy-duty aluminum pivot door, vertical center axis rotation, oversized glass, architectural statement. It delivers on all four.
Technical Specifications
Here’s what’s under the surface of the VLX 100. These numbers matter when you’re comparing pivot door systems side by side.
- Frame wall thickness: 0.098 inches of extruded aluminum, a heavier gauge than typical residential framing
- Profile width: 2.56 inches, slim enough for a modern sightline, wide enough to carry the slab and glass load
- Maximum slab size: Up to 60 inches wide by 120 inches tall, which allows true oversized single-panel entries
- Glass options: Clear, Frosted, Obscure, Low-E, Tempered, Laminated
- Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
- Pivot hardware: Top and bottom pivot points rated for the full slab weight, adjustable for precise alignment
- Threshold: Low-profile aluminum sill designed for smooth transitions and water management
- Performance standards: NFRC-rated thermal break technology, AAMA 2400/2410 installation compliance, AAMA 812 perimeter sealing
Every VLX 100 we order for Miami Gardens clients is specced for that specific opening. There’s no “close enough” with pivot doors. The slab weight, glass type, and pivot hardware all need to line up or the door will never operate the way it should.
Performance Features
Thermal Efficiency - The VLX 100 frame incorporates a thermal break that separates the interior and exterior aluminum, reducing heat transfer through the metal. For Miami Gardens summers, that means less solar gain at the entry and a door that doesn’t radiate heat into your air-conditioned foyer. The NFRC-rated performance data backs this up.
Acoustic Performance - Laminated glass options on the VLX 100 significantly cut exterior noise transmission. If you live near a busy street in Miami Gardens or near commercial zones, the laminated glass option is worth the upgrade. The difference between standard tempered glass and laminated glass for noise control is noticeable the day the door is installed.
Airtightness & Weather Seal - Pivot doors have a reputation for gaps, but that comes from poor installation and cheap seals, not the pivot concept itself. The VLX 100 uses compression weatherstripping around the full perimeter. When we set the door, we check the seal compression at every point, not just the lock side. The AAMA 812 low-expansion foam we install around the frame creates a continuous air barrier between the door assembly and your rough opening.
Waterproofing - Water management on a pivot door is handled at three levels: the frame design, the perimeter sealant, and the threshold system. The low-profile aluminum sill channels water away from the interior. We apply AAMA 812 foam sealant at every perimeter joint during installation, then run a water test to verify nothing seeps through. Miami Gardens gets enough driving rain that this step is non-negotiable.
Wind Resistance - The VLX 100 frame is wind-load rated for local climate requirements, including the higher exposure zones across South Florida. The 0.098-inch wall thickness and the structural aluminum profile are engineered to handle sustained wind pressure and gust cycles without flexing or seal failure. For homeowners in Miami Gardens who want the oversized glass look, this is the spec that makes it safe.
Security & Hardware - The pivot mechanism itself is a security feature: the door is supported at top and bottom, which makes forced entry from the lock side much harder than on a standard hinged door. The multi-point locking hardware engages at the top, bottom, and center. Impact-resistant laminated glass is available for the VLX 100, which adds a layer of protection against both forced entry and windborne debris during storm season.
Color & Glass Options
The VLX 100 comes in six finish options, and each one changes the personality of the door completely. Premium Black is the most requested finish we order for Miami Gardens modern homes. It reads sharp and architectural, and it pairs well with white stucco or concrete exteriors. Pure White works beautifully on coastal contemporary homes and anything with a lighter exterior palette. Anodized Silver has a raw metallic quality that suits minimalist and industrial-inspired designs. Bronze carries a warmer, richer tone, and it’s our recommendation for homes with wood accents or warmer exterior colors. Champagne is subtle, soft, and works well on transitional designs where bright metal feels too cold. Teak Wood gives you the warmth of wood grain without the maintenance of actual timber, a practical upgrade for Miami Gardens homeowners who want that look but don’t want the upkeep in a humid climate.
On the glass side, Clear maximizes light and views, but it also puts your interior on display, which matters depending on how close your entry sits to the street. Frosted and Obscure glass diffuse light while maintaining privacy, a smart choice for front entries on busier Miami Gardens streets. Low-E coatings reduce solar heat gain and UV exposure through the large glass panel. Tempered glass is standard for safety. Laminated glass is the option we strongly recommend for front entries: it holds together if it breaks, cuts noise, and in the impact-rated version, meets code for windborne debris protection.
Installation by TruePane Windows & Doors in Miami Gardens
A pivot door lives and dies on its installation. The VLX 100 is a precise piece of engineering, and if the frame is out of square by even a small fraction, the slab will bind, the weatherstripping won’t seal, and the pivot hardware will wear prematurely. We’ve seen it happen with doors installed by general contractors who treat a pivot door like a standard entry door. It’s not the same job.
Our installation process starts with a pre-installation inspection of the rough opening. We check the opening dimensions against the ordered door, verify the floor is level, and assess the substrate condition before anything gets set. Then we set the frame level, plumb, and square, using shims at the pivot points and lock points where the loads actually transfer. The frame gets secured, and we apply AAMA 812 low-expansion foam sealant at every perimeter joint. That seal is what stops air and water from penetrating around the frame, and it’s a step that gets skipped far too often. Then we hang the slab, adjust the pivot mechanism until the door operates smoothly, and run a final water test to confirm the seal is doing its job. We clean up the job site, walk you through the door’s operation and maintenance, and leave you with the manufacturer’s warranty documentation intact.
One thing we want Miami Gardens homeowners to understand clearly: improper installation voids the manufacturer’s warranty on the VLX 100. ViewLux backs this product when it’s installed per their requirements and AAMA 2400/2410 standards. If you let an unqualified crew set this door and it warps, leaks, or binds, you own that problem. TruePane Windows & Doors installs every VLX 100 to the exact manufacturer spec, which keeps your warranty valid and the door operating the way it was engineered to.
Frequently Asked Questions - VLX 100 Pivot Door
What is the lead time for the VLX 100 Pivot Door? The VLX 100 is a custom-ordered product, and lead time typically runs 6 to 10 weeks from order approval to delivery at our Miami Gardens warehouse. Finish, glass type, and slab size can all affect the timeline. We’ll give you a firm date window when you place the order. Call (386) 516-5343 to get the current lead time for your exact configuration.
Does the VLX 100 qualify for energy tax credits? The VLX 100 can qualify for energy efficiency incentives when specced with Low-E glass and the thermally broken frame, subject to current federal and local program requirements. Miami Gardens homeowners should consult their tax professional for eligibility. We can provide the NFRC performance data you’ll need for documentation. Call (386) 516-5343 and we’ll help you gather the specs.
What warranty comes with the VLX 100 Pivot Door? The VLX 100 carries a manufacturer’s warranty from ViewLux, and that warranty stays valid only when the door is installed by an authorized partner per AAMA standards. TruePane Windows & Doors is an authorized ViewLux installation partner, so your warranty protection is intact from day one. We’ll walk you through the warranty terms before you sign anything.
Can I customize the size of the VLX 100? The VLX 100 is built to your opening dimensions, up to a maximum slab size of 60 inches wide by 120 inches tall. You’re not picking from stock sizes. We measure your opening precisely during the free on-site assessment, and the door is fabricated to those dimensions. It’s a made-to-measure product.
How do I maintain the VLX 100 aluminum frame and pivot hardware? Aluminum frames need little more than an occasional cleaning with mild soap and water, which is one reason they hold up so well in Miami Gardens’s humid, salt-adjacent climate. The pivot mechanism should be checked annually for smooth operation, and the weatherstripping should be inspected for compression loss. We offer maintenance visits for all doors we install, so the door you buy from us stays operating like new.
How much does the VLX 100 cost in Miami Gardens? Pricing depends on slab size, glass type, finish, and hardware configuration. A baseline VLX 100 typically starts in the $7,000 to $11,000 range installed, with larger slabs, laminated impact glass, and premium finishes moving the price upward from there. Call (386) 516-5343 for a detailed quote on your specific opening - estimates are free, and we’ll give you line-item pricing so you know exactly where your money goes.
Get a Quote - VLX 100 Pivot Door in Miami Gardens
The VLX 100 is a door you’ll look at every single day. It’s worth getting it right. Call TruePane Windows & Doors at (386) 516-5343 to schedule a free on-site measurement and project walkthrough in Miami Gardens. We’ll spec the door, price it line by line, and handle the installation to manufacturer and AAMA standards. Your entry deserves it.
Written by the team at TruePane Windows & Doors, serving Miami Gardens and surrounding South Florida communities since day one.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images



Before
After
Before
After
Before
After